64″ Fountain RC Boat – Ready to Run

*Custom paint available – Please contact us with your idea for an estimate. Pictures can be E-mailed to sales@BonziSports.com or call us at (317)844-4695.

Available in seven anodized colors.

Delete – (1) Futaba S3003 throttle servo & (1) Hitec 755MG steering servo.
Upgrade to – (1) Savox 0230MG digital waterproof throttle servo & (1) Savox 0231MG digital waterproof steering servo.

Sturdy latch system for your boat’s hatch cover. (Push Button Hatch Latches Included in RTR.)

Water resistant push button switch that hooks up to your engine’s ignition coil to electronically shut the engine off.

aluminum billet gas cap designed for the BONZI’ Fuel Tank. Long-lasting, this cap is not only stylish, it’s super strong and virtually UNBREAKABLE.

*REQUIRES GAS HAND PUMP FOR USE*

Created for high-efficiency cooling, the 26cc Bonzi “Very Cool” Water Jacket is a great mod for your Zenoah Stock G260PUM.
(Note: The “Very Cool” Water Jacket comes standard on the BZx4 engine modification package).

Features:
-CNC machined fins for increased heat dissipation
-2 inlets and 2 outlets for increased cooling water flow
-Increased water volume for more efficient cooling and better fit under the hatch (as compared to the stock Zenoah jacket)
-Includes stainless steel cap screws (for mounting) and brass water fittings
*Available in (7) anodized colors.

Created for high-efficiency cooling, the 29/30cc Bonzi “Very Cool” Water Jacket is a great mod for your Zenoah Stock G260PUM.
(Note: The “Very Cool” Water Jacket comes standard on the BZx4 engine modification package).

Features:
-CNC machined fins for increased heat dissipation
-2 inlets and 2 outlets for increased cooling water flow
-Increased water volume for more efficient cooling and better fit under the hatch (as compared to the stock Zenoah jacket)
-Includes stainless steel cap screws (for mounting) and brass water fittings
*Available in (7) anodized colors.

Attaches to the carburetor for improvement and increased airflow through the carb, making it easier to choke.
*Available in (7) anodized colors.

Bonzi Digital Waterproof Tachometer for RC engines.
Engine RPM and Hour Meter.
Records engine RPM range to prevent over-revving.
Identify prop load on your engine from this information.

Add a real-look enhancement to your boat. Can be used as a single, a pair, or four (4) tips for a true full-size boat look.

Machined aluminum antenna mounts available in anodized colors.

Quality Garmin eTrex 10 waterproof GPS system, accurate down to the exact mile per hour.
Garmin’s entry-level eTrex upgrades the level of performance over previous models while maintaining an affordable price.
Details like enhanced geocaching features make this unit popular for more than just finding your location. The 2.2″ monochrome LCD has 128×160-pixel resolution. High-sensitivity, WAAS-enabled GPS receiver with HotFix™ acquires satellite locations quickly for fast start-up times. Unit comes pre-loaded with worldwide basemap. Connect to your computer using the USB interface. Compatible with Garmin spine-mounted accessories. Powered by two AA batteries (not included) for up to 20 hours.

BONZI Break-in Oil is formulated for max performance in Zenoah Marine or Air Cooled engine
Stock or modified engines will help to properly seat the ring to the cylinder. This is known as the scuffing process.
Most 100% synthetic oils are so slick that they do not allow this process or take an extremely long time to do so.

Just 5 ounces of BONZI break in oil to one gallon of gas allows for complete engine break-in.

1 QT. SYNTHETIC 2 CYCLE OIL

One of the most commonly over-looked, but important maintenance points on a RC boat is its stuffing tube and prop shaft. Keeping these parts properly serviced to avoid common driveline problems. Done on a regular basis, the cleaning and lubrication of the hull’s stuffing tube, drive cable and prop strut will allow them to function friction-free.

High quality clear polyethylene film seal tape to keep electronics inside the radio box safe from water during runtime.
36 Yds. x 3/4″

Locks the piston in place. – stops piston to allow installation and removal of collet, clutch and flywheel.

Multi-purpose wrench tool for engine care. Can be used to hold, tighten, pull, and test various parts of the engine during building/repair. -remove flywheel -remove recoil pulley -remove clutch arbor -check spark plug