 |
Cylinder (260)
Cast aluminum cylinder combustion chamber |

G260PUM Cylinder
T2076-12110

$44.95 |
Piston (260)
Round aluminum cylinder that travels up and down in the cylinder.
What is the difference between the G231 and G260 pistons?
Click to find out |

G260PUM Piston
T2088-41110

$18.95 |
Piston Ring (260)
Adjustable split metal ring that fits around a piston and seals the gap between the piston and the cylinder wall |

G260PUM Piston Ring
T2088-41210

$5.95 |
Cylinder (231)
Cast aluminum cylinder combustion chamber |

G231PUM Cylinder
T2078-12110

$44.95 |
Piston (231)
Round aluminum cylinder that travels up and down in the cylinder. |

G231PUM Piston
T2070-41110

$18.95 |
Piston Ring (231)
Adjustable split metal ring that fits around a piston and seals the gap between the piston and the cylinder wall |

G231PUM Piston Ring
T2070-41210

$5.95 |
Grey Ignition Coil
(260, 231, QD25)
Includes coil, plug cap & spring. Takes the electronic pulses created by the red source coil and produces power to drive the spark plug, allowing ignition |

Grey Ignition Coil
Z2629-71311

$44.95 |
Red Source Coil
(260, 231, QD25)
Creates electric energy from a magnetic pickup located on the flywheel |

Red Source Coil
Z1160-71211

$54.95 |
Plug Cap
(260, 231, QD25)
This covers the plug wire and spring from the Grey Ignition Coil - creates a air-tight connection over the spark plug |

Plug Cap
T2075-72210

$3.99 |
Spring
(260, G231, QD25)
This connects to the spark plug wire from the Grey Ignition Coil to give positive connection to the spark plug |

Spring
Z1400-72121

$0.99 |
Funnel (Velocity Stack)
(260, 231)
On the stock WT-644, it helps maintain an even flow of air and fuel into the carburetor. Includes funnel, 2 bolts & 2 washers for easy installation |

Funnel
T2075-82110

$8.95 |
Snap Ring ("C" Clip)
(260, 231, QD25)
This small clip retains the wrist pin in the piston |

Snap Ring
Z1260-41320

$0.49 |
Lower Crank Case Set (260, 231)
An original cast aluminum lower case set - sold with seals, bolts and gaskets. Bearings (pair) optional
|

Lower Case Set
T2075-21100

$32.95 |
Stock Water Jacket
(260, 231)
Quality aluminum standard cooling jacket - includes brass fittings. Available in your choice of seven anodized colors. |

Stock Water Jacket
T2076-12210

$32.95 |
Water Jacket - Large
"O" Ring (260, 231)
Large "O" ring that works in either stock or "Very Cool" Water Jackets for Zenoah water-cooled engines. |

Large "O" Ring
BZ2032L

$2.50 |
Water Jacket - Small
"O" Ring (260, 231)
Small "O" ring that works in either stock or "Very Cool" Water Jackets for Zenoah water-cooled engines. |

Large "O" Ring
BZ2032S

$1.95 |
BONZÍ "Very Cool" Water Jacket! (260, 231)
Designed for highly efficient cooling of the Zenoah G231and G260PUM engines. Has BONZÍ exclusive anti-distortion blocks, stainless steel hardware and brass water fittings - everything to install onto your engine. |

BONZÍ "Very Cool"
Water Jacket
BZ2032

$46.95 |
Canister Exhaust Muffler
(260, 231)
Made from steel, this is a basic baffle-type muffler - both quiet and economical |

Canister Exhaust Muffler
T2070-15110

$39.95 |
Complete Crank Shaft
(260, 231, QD25)
A steel shaft with lobes and a pin which holds the connecting rod to the piston - transfers the power of the piston movement through a rotational force which supplies the output for the engine |

Crank Shaft
T2075-42000

$48.95 |
Crank Shaft Bearings (2)
(260, 231, QD25)
Precision bearing race that supports the crank shaft inside the engine lower case halves. Sold as a pair. |

Crank Shaft Bearings
Z1155-21240

$17.95 |
Crank Shaft Seal - Small, Front (260, 231, QD25)
Precision bearing race that supports the crank shaft inside the engine lower case halves. |

Crank Shaft Seal - Small (Front)
Z2169-21210

$4.95 |
Crank Shaft Seal - Large, Rear (260, 231, QD25)
Precision bearing race that supports the crank shaft inside the engine lower case halves. |

Crank Shaft Seal - Large (Rear)
Z1850-21220

$5.95 |
Complete Crank Shaft
(230RC)
A steel shaft with lobes and a pin which holds the connecting rod to the piston - transfers the power of the piston movement through a rotational force which supplies the output for the engine |

Crank Shaft - G230RC
T2070-42000

$48.95 |
Insulator Bolt M5X20
(260, 231)
These bolts are used to mount the insulator block to the engine. (2 required) |

Insulator Bolt
3310-12281

$0.50/each |
Insulator Block
(260, 231, QD25)
Goes between the caburetor and the engine. This is the part of the engine that is drilled and tapped for use with a clutch/water pump.
*Using a water pump? Make sure to have us drill/tap this block for only $5! * |

Insulator Block
T1148-13162

$9.95 |
Zero Drag Seals (Pair)
(260, 231, 230RC)
Want a 300RPM power boost?
These precision-machined inserts press into the existing front & rear crankshaft seals. They reduce the drag that is created from the rubber seal which increase performance.
|

Zero Drag Seals
BZ2029

$19.95/pair |
BONZÍ Throttle Cable Assembly (260, 231, QD25 {mod required})
Flexible cable that connects the throttle servo in the radio box to the engine's carburetor, producing smooth throttle
14" standard, 18" long
Specify for which carb
|
|
Piston Stop Tool
(260, 231, QD25)
Available in anodized colors, it is used to lock the piston in place - allowing you to loosen and tighten collet bolts and flywheels |

Piston Stop Tool
BZ2167

$19.95 |
Walbro Carb Rebuild Kit
(260, 231, QD25)
Everything you need to rebuild the Walbro carburetor. Includes all necessary gaskets, diaphragms, filters and other small miscellaneous pieces. Does not include needles |
Carb Rebuild Kit
BZ2174

$9.95 |
 |
Walbro WT-644 Carb
(260, 231, QD25)
Fits all Zenoah 23cc and 26cc engines (Car, airplane, boat, helicoptor, etc...) as well as other brands and size engines. Primer bulb allows for easy starting. Comes standard on G260/G231 engines
12.7mm venturi |

Walbro WT-644 Carb
BZ2168

$39.95 |
Walbro WT-257 Big Bore Carb (260, 231, QD25)
Features a larger intake volume over the stock 644 carb, providing more fuel & air, translating to more horsepower! Works on many other engines besides those listed as well
12.7mm venturi |

Walbro WT-257
Big Bore Carb
BZ2025
$44.95
|
Walbro WT-813 Big Bore Carb (260, 231, QD25)
- High-performance! -
Independent tunable high & low speed jets. Has an accelerator pump built-in & primer bulb. Most carbs have limited pumping pressure at 1/2 or full throttle. Has increased pumping pressure & smoother response.
|

Walbro WT-813A
Big Bore Carb
BZ2038

$54.95
12.7mm venturi
|
Case Gasket
(260, 231)
Formed composite material that seals the lower two case halves |

Case Gasket
T2075-21140

$2.95 |
Carb Gasket
(260, 231, QD25)
Formed composite material that seals the carb and the insulator block |

Carb Gasket
T2075-14120

$1.95 |
Cylinder Base Gasket
(260, 231)
Formed composite material that seals between the bottom of the cylinder and the top of the cases |

Cylinder Base Gasket
T2075-13120

$1.95 |
Exhaust Gasket
(260, 231, QD25)
Formed composite material that seals the case and the exhaust pipe |

Exhaust Gasket
Z1140-13141

$1.95 |
Insulator Gasket
(260, 231, QD25)
Formed composite material that seals between the insulator block and the cylinder |

Insulator Gasket
T2075-13150

$1.95 |
Complete Gasket Set
(260, 231)
Set includes carb gasket, cylinder base gasket, case gasket, exhaust gasket and insulator gasket |

Complete Gasket Set
BZ2540

$6.95 |
Wrist Pin
(260, QD25)
Pin that attaches one end of a connecting rod to the piston. Not for the G231PUM. |

G260 Wrist Pin
Z1600-41310

$4.95 |
Wrist Pin Bearing
(260, 231, QD25)
Bearing race that supports the wrist pin in the center of the piston and the connecting rod |

Wrist Pin Bearing
Z5500-41410

$5.95 |
Wrist Pin Bearing Washer (260, 231, QD25)
Cap-type washer that is placed on each end of the wrist pin bearing as a spacer |

Wrist Pin Bearing Washer
Z1101-41340

$1.95 |
|
Stainless Steel Hardware Package for Zenoah
(260, 231, QD25)
Upgrade your standard engine washers/screws/etc with our all-new stainless steel kit!
Click to view diagram |
Stainless Steel Hardware Package
BZ2501

$8.95
|
Flywheel Puller
(260, 231, QD25)
Zenoah tool designed for easy removal of flywheel on Zenoah engines |

Flywheel Puller
Z1490-96101

$49.95 |
Champion Spark Plug
(260, 231, QD25)
This is the standard reliable Champion brand spark plug that comes on our Zenoah engine line
|

Champion RZ7C
CHAMPRZ7C

$6.95 |
NGK Iridium Spark Plug
(260, 231, QD25)
Zenoah-recommended for premium performance. Iridium is a precious metal that is 6x harder and 8x stronger than platinum!
*Please be aware that the Iridium plug height is 3/8" higher than stock spark plugs. Please plan accordingly.* |

NGK Spark Plug
NGKCR8HIX

$9.95 |
NGK CMR7H Spark Plug (260, 231, QD25, 230RC)
Insterted into the head of an internal-combustion engine cylinder that ignites the fuel mix by means of an electrode |

NGK Spark Plug
NGKCMR7H

$5.95 |
Recoil Ratchet
(260, 231, QD25)
Replacable ring inside the recoil assembly which engages onto the recoil pulley |

Recoil Ratchet
5990-75141

$4.95 |
Recoil Assembly
(260, 231, QD25)
Otherwise known as the pull starter, this is used to fire up/start the engine |

Recoil Assembly
1861-75101

$29.95 |
Recoil Pulley
(260, 231, QD25)
This locks the flywheel in place and is the positive engagement connection for the recoil starter |

Recoil Pulley
Z1160-75210

$5.95 |
AMSOIL 100:1 Premix Synthetic 2-Cycle Oil
Quality oil - recommended for our Zenoah engine line.
Choice of
- 1 8oz. bottle - $4.95
- 1 Quart - $9.95
- 1 case (12 eight oz.) - $49.95 
BZ8012 |

BZ8A10

$4.95
BZ8011

$9.95
|
Honda HP2 Oil
16 oz. bottle of Honda HP2 oil - recommended for the Quickdraw high performance engine line
|
Honda HP2
BZHP2

$9.95 |
BONZÍ Break-In Oil
Just 5 ounces of BONZI' break in oil to one gallon of gas allows for complete engine break-in.
(1) 10 oz. bottle
Use for two complete break-ins.
We STRONGLY RECOMMEND this product for your new Zenoah engine! |
BONZÍ Break-In Oil
BZBIO

$9.95 |
  |